rus
Competent opinion
V. Minnebaev
WE STRIVE TO DEVELOP COMPONENTS THAT ALLOW CUSTOMER TO CREATE BETTER PRODUCT DOI: 10.22184/1992-4178.2022.217.6.12.18
WE STRIVE TO DEVELOP COMPONENTS THAT ALLOW CUSTOMER TO CREATE BETTER PRODUCT DOI: 10.22184/1992-4178.2022.217.6.12.18
G. Levin
WE OVERCOME OBSTACLES SO AS NOT TO SLOW DOWN THE PRODUCTION DEVELOPMENT DOI: 10.22184/1992-4178.2022.217.6.20.24
WE OVERCOME OBSTACLES SO AS NOT TO SLOW DOWN THE PRODUCTION DEVELOPMENT DOI: 10.22184/1992-4178.2022.217.6.20.24
Column of radio-electronic industry department
Report from a company
Yu. Kovalevsky
TO SEEK FOR AND FIND NICHES WHERE IT IS POSSIBLE TO BE USEFUL FOR CUSTOMERS. VISIT TO “IMOTECH” DOI: 10.22184/1992-4178.2022.217.6.48.56
TO SEEK FOR AND FIND NICHES WHERE IT IS POSSIBLE TO BE USEFUL FOR CUSTOMERS. VISIT TO “IMOTECH” DOI: 10.22184/1992-4178.2022.217.6.48.56
Exhibitions & Conferences
Yu. Kovalevsky
DEVELOPERS OF HARDWARE FOR RUSSIAN RAILWAYS OJSC AND ELECTRONIC COMPONENTS PRODUCERS HAVE DISCUSSED WAYS OF COOPERATION IN NEW CONDITIONS JOINT SESSION OF ASSOCIATION OF RAILWAY EQUIPMENT MANUFACTURERS, SECTION NO. 9 OF INTERDEPARTMENTAL WORKING GROUP ON THE ELECTRONIC COMPONENTS DEVELOPMENT AND PRODUCTION OF THE COLLEGIUM OF MILITARY INDUSTRIAL COMMISSION OF THE RUSSIAN FEDERATION AND “PASSIVE ELECTRONIC COMPONENTS” CONSORTIUM
DOI: 10.22184/1992-4178.2022.217.6.36.43
DEVELOPERS OF HARDWARE FOR RUSSIAN RAILWAYS OJSC AND ELECTRONIC COMPONENTS PRODUCERS HAVE DISCUSSED WAYS OF COOPERATION IN NEW CONDITIONS JOINT SESSION OF ASSOCIATION OF RAILWAY EQUIPMENT MANUFACTURERS, SECTION NO. 9 OF INTERDEPARTMENTAL WORKING GROUP ON THE ELECTRONIC COMPONENTS DEVELOPMENT AND PRODUCTION OF THE COLLEGIUM OF MILITARY INDUSTRIAL COMMISSION OF THE RUSSIAN FEDERATION AND “PASSIVE ELECTRONIC COMPONENTS” CONSORTIUM
DOI: 10.22184/1992-4178.2022.217.6.36.43
Yu. Kovalevsky
EMPHASIS ON ELECTROMAGNETIC COMPATIBILITY ASSURANCE PRAXIS “EMC” THE 11TH ALL-RUSSIA SCIENCE AND TECHNOLOGY CONFERENCE
DOI: 10.22184/1992-4178.2022.217.6.44.47
EMPHASIS ON ELECTROMAGNETIC COMPATIBILITY ASSURANCE PRAXIS “EMC” THE 11TH ALL-RUSSIA SCIENCE AND TECHNOLOGY CONFERENCE
DOI: 10.22184/1992-4178.2022.217.6.44.47
NEWS
Economy & Business
V. Enns
MEASURES FOR THE DEVELOPMENT OF DOMESTIC MICROELECTRONICS IN THE PRESENT CONTEXT DOI: 10.22184/1992-4178.2022.217.6.86.92
The plans of the Government of the Russian Federation provide for significant support for the microelectronic industry. The programs proposed for financing focus on the development of design centers that develop integrated circuits with the binding of their products to the final products within the framework of end-to-end projects.
MEASURES FOR THE DEVELOPMENT OF DOMESTIC MICROELECTRONICS IN THE PRESENT CONTEXT DOI: 10.22184/1992-4178.2022.217.6.86.92
The plans of the Government of the Russian Federation provide for significant support for the microelectronic industry. The programs proposed for financing focus on the development of design centers that develop integrated circuits with the binding of their products to the final products within the framework of end-to-end projects.
Tags: design centers domestic microelectronics systemic development of the industry дизайн-центры отечественная микроэлектроника системное развитие отрасли
Information and telecommunication systems
M. Makushin
COMMUNICATIONS: DYNAMICS AND PROBLEMS OF 5G DEPLOYMENT, WORK IN THE FIELD OF 6G. PART 1 DOI: 10.22184/1992-4178.2022.217.6.78.84
It is assumed that the deployment of 5G networks will have a great impact and become one of the factors in the digital transformation of the economy. At the same time, the first 6G networks are expected to appear by 2030.
COMMUNICATIONS: DYNAMICS AND PROBLEMS OF 5G DEPLOYMENT, WORK IN THE FIELD OF 6G. PART 1 DOI: 10.22184/1992-4178.2022.217.6.78.84
It is assumed that the deployment of 5G networks will have a great impact and become one of the factors in the digital transformation of the economy. At the same time, the first 6G networks are expected to appear by 2030.
Tags: 5g technologies 5g-технологии 6g technologies 6g-технологии dynamics estimates forecasts problems динамика оценки проблемы прогнозы
Electronic Components
D. Makhin
K10-89 TUBULAR CERAMIC CAPACITOR SERIES FROM KULON LLC DOI: 10.22184/1992-4178.2022.217.6.124.127
It is reported about the organization of К10-89 tubular ceramic capacitors serial production at Kulon LLC. The product was developed based on capacitive element design for noise suppression filters manufactured by the company. General information and main parameters of tubular capacitors, design features, technological stages of production and key characteristics of K10-89 series are given.
K10-89 TUBULAR CERAMIC CAPACITOR SERIES FROM KULON LLC DOI: 10.22184/1992-4178.2022.217.6.124.127
It is reported about the organization of К10-89 tubular ceramic capacitors serial production at Kulon LLC. The product was developed based on capacitive element design for noise suppression filters manufactured by the company. General information and main parameters of tubular capacitors, design features, technological stages of production and key characteristics of K10-89 series are given.
Tags: capacitive filter element import substitution k10-89 noise suppression filters smoothing filters tubular ceramic capacitors емкостный элемент фильтра импортозамещение к10-89 помехоподавляющие фильтры сглаживающие фильтры трубчатые керамические конденсаторы
Test & Measurements
S. Belov
DEEPENING SELF-MONITORING OF TEST AND VERIFICATION EQUIPMENT FOR CONTROL SYSTEMS: SELF-TESTING OF ANALOG INPUT BOARDS BEFORE THE FINAL ASSEMBLY OF EQUIPMENT. PART 1 DOI: 10.22184/1992-4178.2022.217.6.94.98
A technique is proposed for testing analog input boards as part of test and verification equipment at the stage before the final assembly of the equipment and including standard tests of its self-monitoring. The technique enables to exclude errors during the installation of voltage dividers, calibration and operation tests, and makes it possible to automatically calculate the scale factors. A diagnostic PCB and software have been developed, prototyping has been carried out.
DEEPENING SELF-MONITORING OF TEST AND VERIFICATION EQUIPMENT FOR CONTROL SYSTEMS: SELF-TESTING OF ANALOG INPUT BOARDS BEFORE THE FINAL ASSEMBLY OF EQUIPMENT. PART 1 DOI: 10.22184/1992-4178.2022.217.6.94.98
A technique is proposed for testing analog input boards as part of test and verification equipment at the stage before the final assembly of the equipment and including standard tests of its self-monitoring. The technique enables to exclude errors during the installation of voltage dividers, calibration and operation tests, and makes it possible to automatically calculate the scale factors. A diagnostic PCB and software have been developed, prototyping has been carried out.
Tags: analog input board cамоконтроль scaling factor self-monitoring self-monitoring deepening test and verification equipment voltage divider делитель напряжения контрольно-проверочная аппаратура масштабный коэффициент плата аналогового ввода углубление cамоконтроля
S. Novikov, N. Plugotarenko
RESISTIVE GAS SENSOR RESPONSE DATA PROCESSING METHOD TO REDUCE CONCENTRATION DETERMINATION TIME DOI: 10.22184/1992-4178.2022.217.6.102.106
The article analyzes the method for processing response data from resistive sensors, which makes it possible to reduce the time for determining the gas concentration, as well as to increase the accuracy of the results obtained in comparison with standard measurement methods.
RESISTIVE GAS SENSOR RESPONSE DATA PROCESSING METHOD TO REDUCE CONCENTRATION DETERMINATION TIME DOI: 10.22184/1992-4178.2022.217.6.102.106
The article analyzes the method for processing response data from resistive sensors, which makes it possible to reduce the time for determining the gas concentration, as well as to increase the accuracy of the results obtained in comparison with standard measurement methods.
Microwave electronics
D. Kalashnikov
NPP THORIY JSC. HIGH POWER ELECTRONICS DOI: 10.22184/1992-4178.2022.217.6.58.62
High-power pulsed klystrons or magnetrons are widely used as sources of microwave energy in accelerators for various purposes. The article discusses promising trends for the development of high-power electrovacuum microwave devices, the features and main applications for pulsed and continuous klystrons designed at NPP Thoriy JSC.
NPP THORIY JSC. HIGH POWER ELECTRONICS DOI: 10.22184/1992-4178.2022.217.6.58.62
High-power pulsed klystrons or magnetrons are widely used as sources of microwave energy in accelerators for various purposes. The article discusses promising trends for the development of high-power electrovacuum microwave devices, the features and main applications for pulsed and continuous klystrons designed at NPP Thoriy JSC.
Tags: electrovacuum microwave devices linear accelerator magnetron multibeam klystron pulsed power импульсная мощность линейный ускоритель магнетрон многолучевой клистрон электровакуумные свч-приборы
N. Kulchitsky , A. Naumov, V. Startsev, M. Demyanenko
CURRENT STATE AND PROSPECTS OF MATRIX UNCOOLED TERAHERTZ DETECTORS DOI: 10.22184/1992-4178.2022.217.6.64.71
The article analyzes the prospects for the development of bolometric matrix uncooled detectors. The advantages of uncooled detectors, in addition to low cost and ease of use, lie in their suitability for the manufacture of large-format array receivers.
CURRENT STATE AND PROSPECTS OF MATRIX UNCOOLED TERAHERTZ DETECTORS DOI: 10.22184/1992-4178.2022.217.6.64.71
The article analyzes the prospects for the development of bolometric matrix uncooled detectors. The advantages of uncooled detectors, in addition to low cost and ease of use, lie in their suitability for the manufacture of large-format array receivers.
Tags: development forecasts quantum generators and detectors terahertz radiation квантовые генераторы и детекторы прогнозы развития терагерцовое излучение
V. Kubarev
CHINA SHOWS NOTABLE GROWTH IN MICROWAVE GaN INDUSTRY DOI: 10.22184/1992-4178.2022.217.6.72.76
Specializing in patent analysis and scientific information Knowmade has published a report on the microwave GaN market covering the full range of products: wafers, epitaxy, transistors, microwave MMICs, packaged products, modules and systems based on them.
CHINA SHOWS NOTABLE GROWTH IN MICROWAVE GaN INDUSTRY DOI: 10.22184/1992-4178.2022.217.6.72.76
Specializing in patent analysis and scientific information Knowmade has published a report on the microwave GaN market covering the full range of products: wafers, epitaxy, transistors, microwave MMICs, packaged products, modules and systems based on them.
Tags: developments gallium nitride microwave products market patents production technologies нитрид-галлиевые свч-изделия патенты производство разработки рынок технологии
Microprocessors and FPGAs
A. Strogonov, I. Semeikin
ALTERA’S CYCLONE IV FPGA SERIES BASED FIR FILTER PROJECT DIVERSIFICATION DOI: 10.22184/1992-4178.2022.217.6.108.122
When designing complex projects based on domestic FPGAs difficulties often arise due to limited resources and speed. The article discusses the diversification (diversity of circuit solutions) of the serial FIR filter project based on the Altera Cyclone IV FPGA under conditions of limited hardware resources, and suggests ways to overcome these limitations.
ALTERA’S CYCLONE IV FPGA SERIES BASED FIR FILTER PROJECT DIVERSIFICATION DOI: 10.22184/1992-4178.2022.217.6.108.122
When designing complex projects based on domestic FPGAs difficulties often arise due to limited resources and speed. The article discusses the diversification (diversity of circuit solutions) of the serial FIR filter project based on the Altera Cyclone IV FPGA under conditions of limited hardware resources, and suggests ways to overcome these limitations.
Tags: block memory dsp block filter coefficients fir filter fpga mac block mac-блок multiplier parallel structure блочная память ких-фильтр коэффициенты фильтра параллельная структура плис умножитель цос-блок
Reliability and tests
A. Garanin, A. Maurin
INTERNAL ENEMY WILL NOT PASS OR HOW TO INCREASE THE RELIABILITY OF SOLDER JOINTS DOI: 10.22184/1992-4178.2022.217.6.152.155
One of the most common types of defects in solder joints are voids that appear during PCB reflow. The article discusses effective methods for detecting hidden voids in solder and shows how the quality of solder joints can be significantly improved using a vacuum module built into a reflow oven.
INTERNAL ENEMY WILL NOT PASS OR HOW TO INCREASE THE RELIABILITY OF SOLDER JOINTS DOI: 10.22184/1992-4178.2022.217.6.152.155
One of the most common types of defects in solder joints are voids that appear during PCB reflow. The article discusses effective methods for detecting hidden voids in solder and shows how the quality of solder joints can be significantly improved using a vacuum module built into a reflow oven.
Tags: hidden defects reflow oven solder joint vacuum module voids x-ray system вакуумный модуль паяное соединение печь оплавления пустоты рентгеновская система скрытые дефекты
A. Belous, S. Efimenko, V. Smolich
FEATURES OF ELECTRONIC COMPONENTS TESTING ORGANIZATION IN THE TEMPERATURE RANGE DOI: 10.22184/1992-4178.2022.217.6.158.166
The article presents an overview, classification and main characteristics of equipment for serial production testing of ICs and semiconductor devices in a wide temperature range. It is shown that both automated and non-automated systems can be used for testing.
FEATURES OF ELECTRONIC COMPONENTS TESTING ORGANIZATION IN THE TEMPERATURE RANGE DOI: 10.22184/1992-4178.2022.217.6.158.166
The article presents an overview, classification and main characteristics of equipment for serial production testing of ICs and semiconductor devices in a wide temperature range. It is shown that both automated and non-automated systems can be used for testing.
Tags: collie 301hc and exceed 8808 handlers mh200 and mh250 gravity handlers pass-through chambers thermojet and thermostream thermostatic devices thermojet и thermostream uik.im 1-19 гравитационные хендлеры mh200 и mh250 проходные камеры устройства термостатирующие уик.им 1-19 хендлеры collie 301hc и exceed 8808
for Engineers
Electromechanical components
D. Averichev
HOW TO CHOOSE AN ANALOGUE OF AN ELECTRIC MOTOR BY THE EXAMPLE OF MAXON MOTOR, FAULHABER AND ASSUN MOTOR PRODUCTS DOI: 10.22184/1992-4178.2022.217.6.128.132
During the process of searching for components companies are often faced with the unavailability of various products necessary for new products. Using the products of maxon motor, Faulhaber and Assun Motor as an example the article describes an approach that allows you to quickly select the best option for replacing an electric motor according to key parameters.
HOW TO CHOOSE AN ANALOGUE OF AN ELECTRIC MOTOR BY THE EXAMPLE OF MAXON MOTOR, FAULHABER AND ASSUN MOTOR PRODUCTS DOI: 10.22184/1992-4178.2022.217.6.128.132
During the process of searching for components companies are often faced with the unavailability of various products necessary for new products. Using the products of maxon motor, Faulhaber and Assun Motor as an example the article describes an approach that allows you to quickly select the best option for replacing an electric motor according to key parameters.
Tags: analog brushed motor brush material motor diameter rated torque rotation speed аналог диаметр двигателя коллекторный двигатель материал щеток номинальный крутящий момент скорость вращения
Production technologies
Sh. Shugaepov, E. Ermolaev, V. Egoshin
FEATURES OF MULTILEAD PACKAGES PRODUCTION USING THIN CERAMIC TAPES DOI: 10.22184/1992-4178.2022.217.6.142.144
The article considers the features of the technologies for multilead packages production using thin ceramic tapes adopted by Plant of Semiconductor Devices JSC (ZPP JSC).
FEATURES OF MULTILEAD PACKAGES PRODUCTION USING THIN CERAMIC TAPES DOI: 10.22184/1992-4178.2022.217.6.142.144
The article considers the features of the technologies for multilead packages production using thin ceramic tapes adopted by Plant of Semiconductor Devices JSC (ZPP JSC).
V. Lanin, A. Khatskevich
FORMING BGA LEADS USING INDUCTION HEATING DOI: 10.22184/1992-4178.2022.217.6.146.151
The article describes the prototype of induction soldering system for forming ball leads based on a ZVS generator using a magnetic conductor and eddy current concentrators of various geometric configurations. The evaluation of thermal fields in the heating zone of solder balls was carried out, the induction heating profile was optimized, the dependences of the influence eddy current concentrator geometric shape on the quality of the soldered leads were obtained.
FORMING BGA LEADS USING INDUCTION HEATING DOI: 10.22184/1992-4178.2022.217.6.146.151
The article describes the prototype of induction soldering system for forming ball leads based on a ZVS generator using a magnetic conductor and eddy current concentrators of various geometric configurations. The evaluation of thermal fields in the heating zone of solder balls was carried out, the induction heating profile was optimized, the dependences of the influence eddy current concentrator geometric shape on the quality of the soldered leads were obtained.
Tags: eddy current concentrator formation of ball leads heating efficiency heating profile induction heating in magnetic conductor gap induction soldering system susceptors zvs generator zvs-генератор индукционный нагрев в зазоре магнитопровода концентратор вихревых токов профиль нагрева система индукционной пайки сусцепторы формирование шариковых выводов эффективность нагрева
Micro and nanostructures
O. Nalivaiko, A. Turtsevich, V. Plebanovich, V. Rogovoy
INTERCOMPONENT INSULATION FOR SUBMICRON ICs USING DIELECTRIC FILLED GROOVES DOI: 10.22184/1992-4178.2022.217.6.134.140
The article presents the process for creating intercomponent insulation, which makes it possible to reduce the structure relief height to less than 0.1 μm and to narrow down the insulation region width to 0.5 μm.
INTERCOMPONENT INSULATION FOR SUBMICRON ICs USING DIELECTRIC FILLED GROOVES DOI: 10.22184/1992-4178.2022.217.6.134.140
The article presents the process for creating intercomponent insulation, which makes it possible to reduce the structure relief height to less than 0.1 μm and to narrow down the insulation region width to 0.5 μm.