rus
Competent opinion
A. Grigorieva
NOW IS THE TIME TO PRODUCE! HOW THE DESIGN COMPANY FOR DOMESTIC MATERIALS AND EQUIPMENT FOR THE PRINTED CIRCUIT BOARDS PRODUCTION IS DEVELOPING DOI: 10.22184/1992-4178.2024.241.10.14.20
NOW IS THE TIME TO PRODUCE! HOW THE DESIGN COMPANY FOR DOMESTIC MATERIALS AND EQUIPMENT FOR THE PRINTED CIRCUIT BOARDS PRODUCTION IS DEVELOPING DOI: 10.22184/1992-4178.2024.241.10.14.20
A. Kravtsov
NIIME JSC – 60 YEARS OF LEADERSHIP IN DOMESTIC ELECTRONICS DOI: 10.22184/1992-4178.2024.241.10.22.24
NIIME JSC – 60 YEARS OF LEADERSHIP IN DOMESTIC ELECTRONICS DOI: 10.22184/1992-4178.2024.241.10.22.24
Report from a company
Yu. Kovalevsky
LOCALIZATION OF EQUIPMENT PRODUCTION: FROM FUME EXTRACTORS TO UNIQUE ROBOTIC SETUPS VISIT TO THE PRODUCTION FACILITY OF PROTECH LTD. DOI: 10.22184/1992-4178.2024.241.10.50.60
LOCALIZATION OF EQUIPMENT PRODUCTION: FROM FUME EXTRACTORS TO UNIQUE ROBOTIC SETUPS VISIT TO THE PRODUCTION FACILITY OF PROTECH LTD. DOI: 10.22184/1992-4178.2024.241.10.50.60
Company Profile
I. Kosykh
MicroEM TECHNOLOGIES: MORE THAN A TECHNOLOGY PARTNER DOI: 10.22184/1992-4178.2024.241.10.62.63
MicroEM TECHNOLOGIES: MORE THAN A TECHNOLOGY PARTNER DOI: 10.22184/1992-4178.2024.241.10.62.63
Exhibitions & Conferences
Yu. Kovalevsky
PLENARY SESSIONS OF THE “MICROELECTRONICS 2024” RUSSIAN FORUM PART 2 DOI: 10.22184/1992-4178.2024.241.10.36.41
PLENARY SESSIONS OF THE “MICROELECTRONICS 2024” RUSSIAN FORUM PART 2 DOI: 10.22184/1992-4178.2024.241.10.36.41
R. Mangusheva, A. Bolshakov, N. Misnichenko
POSITIVE TRENDS AND DYNAMICS OF ELECTRONICS DEVELOPMENT IN RUSSIA ROUND TABLE «ACHIEVEMENTS OF DOMESTIC MICROELECTRONICS UNDER SANCTIONS. WHAT WILL WE HAVE TIME TO DO BY EXPOELECTRONICA 2025?» DOI: 10.22184/1992-4178.2024.241.10.42.48
The article presents the results of a survey of participants and visitors of the ExpoElectronica exhibition, conducted by ITE Group and Tracemarket LLC. The problems and prospects for the development of the domestic electronic components market are discussed.
The study covered more than 300 industry representatives, including manufacturers and distributors.
POSITIVE TRENDS AND DYNAMICS OF ELECTRONICS DEVELOPMENT IN RUSSIA ROUND TABLE «ACHIEVEMENTS OF DOMESTIC MICROELECTRONICS UNDER SANCTIONS. WHAT WILL WE HAVE TIME TO DO BY EXPOELECTRONICA 2025?» DOI: 10.22184/1992-4178.2024.241.10.42.48
The article presents the results of a survey of participants and visitors of the ExpoElectronica exhibition, conducted by ITE Group and Tracemarket LLC. The problems and prospects for the development of the domestic electronic components market are discussed.
The study covered more than 300 industry representatives, including manufacturers and distributors.
Tags: domestically produced electronic component base industry survey market research nps index индекс приверженности маркетинговые исследования отраслевой опрос экб отечественного производства
NEWS
Artificial Intelligence
M. Makushin
ARTIFICIAL INTELLIGENCE: NEW ARCHITECTURES OF AI PROCESSORS AND EXPANDING ROLE IN IC DESIGN DOI: 10.22184/1992-4178.2024.241.10.138.147
The article considers the new architectures of AI processors,
allowing to balance their speed and efficiency. It is noted that the role of AI in IC design is constantly expanding as CAD tools become more complex.
ARTIFICIAL INTELLIGENCE: NEW ARCHITECTURES OF AI PROCESSORS AND EXPANDING ROLE IN IC DESIGN DOI: 10.22184/1992-4178.2024.241.10.138.147
The article considers the new architectures of AI processors,
allowing to balance their speed and efficiency. It is noted that the role of AI in IC design is constantly expanding as CAD tools become more complex.
Tags: 2 2.5d and 3.5d architectures 5d-архитектуры 5d- и 3 ai in cad data centers edge computing processor sram ии в сапр краевые вычисления процессор созу центры обработки данных
Information and telecommunication systems
I. Chikvarkin
NIIMA «PROGRESS»: WIRELESS COMMUNICATIONS AND NAVIGATION SOLUTIONS FOR VARIOUS DEVICES – DATA EXCHANGE, NAVIGATION AND COMMUNICATIONS. PART 2 DOI: 10.22184/1992-4178.2024.241.10.122.124
The article reviews the specific examples of domestic navigation, navigation-communication and radio modules developed
by specialists of NIIMA “Progress» JSC. Information is provided on their presence in the 719 and 878 RF PP registers. Planned developments are modules of new generations of Wi-Fi,
Bluetooth and 5G standard.
NIIMA «PROGRESS»: WIRELESS COMMUNICATIONS AND NAVIGATION SOLUTIONS FOR VARIOUS DEVICES – DATA EXCHANGE, NAVIGATION AND COMMUNICATIONS. PART 2 DOI: 10.22184/1992-4178.2024.241.10.122.124
The article reviews the specific examples of domestic navigation, navigation-communication and radio modules developed
by specialists of NIIMA “Progress» JSC. Information is provided on their presence in the 719 and 878 RF PP registers. Planned developments are modules of new generations of Wi-Fi,
Bluetooth and 5G standard.
Tags: 2g/3g modem 4g lte and pr1803 module series navigation receiver модем 2g/3g навигационный приемник серии модулей 4g lte и пр1803
E. Starovoytov, E. Skiba
LASER LOCATION SYSTEMS 3D FLASH LADAR FOR INTELLIGENT TRANSPORT NAVIGATION DOI: 10.22184/1992-4178.2024.241.10.126.130
Laser location systems or lidars are one of the main types of sensors used in unmanned vehicles and mobile robots. The article considers the lidars with optical-mechanical scanning, based on 3D Flash Ladar technology and a hybrid scheme.
LASER LOCATION SYSTEMS 3D FLASH LADAR FOR INTELLIGENT TRANSPORT NAVIGATION DOI: 10.22184/1992-4178.2024.241.10.126.130
Laser location systems or lidars are one of the main types of sensors used in unmanned vehicles and mobile robots. The article considers the lidars with optical-mechanical scanning, based on 3D Flash Ladar technology and a hybrid scheme.
Tags: 3d cameras 3d-камеры adas system autolidars laser location lls photodetector автолидары лазерная локация ллс система adas фпу
Manufacturing equipment and process materials
D. Koren, A. Garanin
PLANAR COMPONENT LEAD FORMING SYSTEMS DOI: 10.22184/1992-4178.2024.241.10.76.80
The article presents a comparative analysis of systems
for automating the process of forming leads of planar components supplied to Russian enterprises.
PLANAR COMPONENT LEAD FORMING SYSTEMS DOI: 10.22184/1992-4178.2024.241.10.76.80
The article presents a comparative analysis of systems
for automating the process of forming leads of planar components supplied to Russian enterprises.
Tags: automatic lead forming and cutting machines ball leads flat leads gull-wing leads j-leads lead forming manual lead forming machines автоматические системы формовки и обрубки выводов выводы j-типа выводы типа «крыло чайки» плоские выводы ручные системы формовки формовка выводов шариковые выводы
A. Ivanov
DEMONSTRATION TESTS OF TECHNOLOGICAL EQUIPMENT AND MATERIALS FOR CLEANING PRINTED CIRCUIT BOARDS DOI: 10.22184/1992-4178.2024.241.10.82.84
The article discusses the results of tests of two developments
of the Dipol Group of Companies: the SM-16 PRO jet cleaning machine for printed circuit boards and the AquaClean-M cleaning liquid, which is an analogue of foreign versions.
DEMONSTRATION TESTS OF TECHNOLOGICAL EQUIPMENT AND MATERIALS FOR CLEANING PRINTED CIRCUIT BOARDS DOI: 10.22184/1992-4178.2024.241.10.82.84
The article discusses the results of tests of two developments
of the Dipol Group of Companies: the SM-16 PRO jet cleaning machine for printed circuit boards and the AquaClean-M cleaning liquid, which is an analogue of foreign versions.
Tags: cleaning liquid jet cleaning machine printed circuit board отмывочная жидкость печатная плата установка струйной отмывки
V. Egoshin, Sh. Shugaepov, R. Akhmetgaliev, E. Ermolaev, A. Mazurenko, Yu. Chernysheva
USE OF DOMESTIC DEEP-CALCINED ALUMINA FOR THE PRODUCTION OF METAL-CERAMIC PACKAGES DOI: 10.22184/1992-4178.2024.241.10.86.89
The article reviews the problems of localization of production
of metal-ceramic packages in «Semiconductor Devices Plant»
JSC («ZPP» JSC) using domestic deep-calcined alumina as an example. The methods of studying such alumina, as well as the experience
of its use for the production of metal-ceramic packages are given.
USE OF DOMESTIC DEEP-CALCINED ALUMINA FOR THE PRODUCTION OF METAL-CERAMIC PACKAGES DOI: 10.22184/1992-4178.2024.241.10.86.89
The article reviews the problems of localization of production
of metal-ceramic packages in «Semiconductor Devices Plant»
JSC («ZPP» JSC) using domestic deep-calcined alumina as an example. The methods of studying such alumina, as well as the experience
of its use for the production of metal-ceramic packages are given.
Engineering solutions
V. Ivanov, D. Sukhanov
TRENDS IN PACKAGING AND ASSEMBLY OF DISCRETE POWER COMPONENTS BASED ON MOSFETs DOI: 10.22184/1992-4178.2024.241.10.154.162
The article considers various types of power semiconductor devices. Information is provided on different types of packages for power components based on MOSFETs offered by a number
of manufacturers.
TRENDS IN PACKAGING AND ASSEMBLY OF DISCRETE POWER COMPONENTS BASED ON MOSFETs DOI: 10.22184/1992-4178.2024.241.10.154.162
The article considers various types of power semiconductor devices. Information is provided on different types of packages for power components based on MOSFETs offered by a number
of manufacturers.
K. Epifantsev, O. Kurkova
AUTOMATION AND CALIBRATION OF A MULTIPLEX SYSTEM OF SHAPE DEFECTS MEASUREMENT SENSORS DOI: 10.22184/1992-4178.2024.241.10.174.179
The article considers the possibility of replacing the contact probe
of the Roundtest RA-120P roundness tester with a contactless triplex sensor. The potential automation of measurements that becomes possible as a result of this replacement is discussed.
AUTOMATION AND CALIBRATION OF A MULTIPLEX SYSTEM OF SHAPE DEFECTS MEASUREMENT SENSORS DOI: 10.22184/1992-4178.2024.241.10.174.179
The article considers the possibility of replacing the contact probe
of the Roundtest RA-120P roundness tester with a contactless triplex sensor. The potential automation of measurements that becomes possible as a result of this replacement is discussed.
Tags: capacitive sensor eddy current sensor laser sensor roundness tester shape defects вихретоковый датчик дефекты формы емкостный датчик кругломер лазерный датчик
Test & Measurements
N. Lemeshko, M. Gorelkin
FEATURES OF THE APPLICATION OF MULTICHANNEL SIGNAL GENERATORS USING THE EXAMPLE OF NOSEAN MSG5000 SERIES DEVICES. PART 2 DOI: 10.22184/1992-4178.2024.241.10.98.106
The second part of the article presents information
on the characteristics and functional features of the MSG5000
series generators from Nosean, as well as the results
of an experimental assessment of keeping the signals phase conditions of these devices in the unmodulated carrier
and pulse modulation modes.
FEATURES OF THE APPLICATION OF MULTICHANNEL SIGNAL GENERATORS USING THE EXAMPLE OF NOSEAN MSG5000 SERIES DEVICES. PART 2 DOI: 10.22184/1992-4178.2024.241.10.98.106
The second part of the article presents information
on the characteristics and functional features of the MSG5000
series generators from Nosean, as well as the results
of an experimental assessment of keeping the signals phase conditions of these devices in the unmodulated carrier
and pulse modulation modes.
Tags: amplitude/phase/frequency/pulse modulation frequency and power sweep harmonic component level nosean msg5000 series multichannel signal generator signal phase coherence амплитудная/фазовая/частотная/импульсная модуляция многоканальный генератор сигналов серии msg5000 от nosean свипирование по частоте и мощности уровень гармонических составляющих фазовая когерентность сигналов
N. Lemeshko, A. Agureev, T. Pleshkova
DYNAMIC RANGE OF SPECTRUM ANALYZERS: FEATURES OF ASSESSMENT AND ACCOUNTING DURING MEASUREMENTS. PART 2 DOI: 10.22184/1992-4178.2024.241.10.108.115
The article analyzes the methods of experimental determination
of the dynamic range of spectrum analyzers and reveals
their essential features. The results of such measurements
for SK4-MAX6 series spectrum analyzers in the frequency range
from 10 kHz to 26.5 GHz are presented.
DYNAMIC RANGE OF SPECTRUM ANALYZERS: FEATURES OF ASSESSMENT AND ACCOUNTING DURING MEASUREMENTS. PART 2 DOI: 10.22184/1992-4178.2024.241.10.108.115
The article analyzes the methods of experimental determination
of the dynamic range of spectrum analyzers and reveals
their essential features. The results of such measurements
for SK4-MAX6 series spectrum analyzers in the frequency range
from 10 kHz to 26.5 GHz are presented.
Tags: dynamic range intermodulation intrinsic noise spectrum analyzer анализатор спектра динамический диапазон интермодуляция собственный шум
M. Kalashnikova
ECOLOGICAL SIGNIFICANCE AND MAIN OBJECTIVES OF THE STUDY OF POTENTIAL RADON HAZARD OF THE TERRITORY DOI: 10.22184/1992-4178.2024.241.10.120.121
The article examines the impact of potential radon hazard
of territories on the environmental safety of the region and provides the necessary information for making informed decisions and taking measures to protect the environment from radiation exposure.
ECOLOGICAL SIGNIFICANCE AND MAIN OBJECTIVES OF THE STUDY OF POTENTIAL RADON HAZARD OF THE TERRITORY DOI: 10.22184/1992-4178.2024.241.10.120.121
The article examines the impact of potential radon hazard
of territories on the environmental safety of the region and provides the necessary information for making informed decisions and taking measures to protect the environment from radiation exposure.
Tags: environmental safety measures minimization potential radon hazard radon risk меры минимизация потенциальная радоноопасность радон риск экологическая безопасность
Problems and solutions
V. Alekseev
ON METHODOLOGICAL APPROACHES TO THE FORMATION OF REQUIREMENTS FOR THE LEVEL OF LOCALIZATION OF THE ELECTRONIC COMPONENT BASE AND OTHER COMPONENTS WITHIN THE FRAMEWORK OF IMPORT SUBSTITUTION PROCESSES FOR RADIO-ELECTRONIC PRODUCTS DOI: 10.22184/1992-4178.2024.241.10.66.70
The article examines methodological approaches to the formation of requirements imposed on electronic components for the purpose of classifying them as products manufactured in the Russian Federation. It presents methods for calculating points to assess
the degree of localization within the point system established
by the Ministry of Industry and Trade of Russia.
ON METHODOLOGICAL APPROACHES TO THE FORMATION OF REQUIREMENTS FOR THE LEVEL OF LOCALIZATION OF THE ELECTRONIC COMPONENT BASE AND OTHER COMPONENTS WITHIN THE FRAMEWORK OF IMPORT SUBSTITUTION PROCESSES FOR RADIO-ELECTRONIC PRODUCTS DOI: 10.22184/1992-4178.2024.241.10.66.70
The article examines methodological approaches to the formation of requirements imposed on electronic components for the purpose of classifying them as products manufactured in the Russian Federation. It presents methods for calculating points to assess
the degree of localization within the point system established
by the Ministry of Industry and Trade of Russia.
Tags: import substitution localization of production objective function point system балльная система импортозамещение локализация производства целевая функция
Microwave electronics
A. Dimaki, O. Kravchenko, G. Kun
AUTOMATIC FREQUENCY ADJUSTMENT WHEN MEASURING S-PARAMETERS OF CONVERTERS USING VECTOR NETWORK ANALYZERS PRODUCED BY MICRAN JSC DOI: 10.22184/1992-4178.2024.241.10.90.94
The article describes the algorithm of automatic frequency adjustment for S-parameters measurement of frequency-converting devices with embedded LO. The features of the operation of this algorithm in various measurement schemes are demonstrated. The use
of the given algorithm expands the scope of application of the VNAs produced by Micran JSC, including satellite communication systems.
AUTOMATIC FREQUENCY ADJUSTMENT WHEN MEASURING S-PARAMETERS OF CONVERTERS USING VECTOR NETWORK ANALYZERS PRODUCED BY MICRAN JSC DOI: 10.22184/1992-4178.2024.241.10.90.94
The article describes the algorithm of automatic frequency adjustment for S-parameters measurement of frequency-converting devices with embedded LO. The features of the operation of this algorithm in various measurement schemes are demonstrated. The use
of the given algorithm expands the scope of application of the VNAs produced by Micran JSC, including satellite communication systems.
Tags: converter embedded lo frequency adjustment vector network analyzer векторный анализатор цепей встроенный гетеродин конвертор подстройка частоты
Industrial Electronics
A. Bekmachev
BLITZSensor. INERTIAL SENSOR STUDIO: FROM HIGH-PRECISION SYSTEMS TO ELECTRIC SCOOTERS DOI: 10.22184/1992-4178.2024.241.10.132.136
Sensors manufactured under the BLITZSensor brand are widely used in projects of various classes. The article presents an overview of technical solutions and products of BLITZSensor, which make high-precision motion parameter measurement systems available even when implementing low-budget tasks.
BLITZSensor. INERTIAL SENSOR STUDIO: FROM HIGH-PRECISION SYSTEMS TO ELECTRIC SCOOTERS DOI: 10.22184/1992-4178.2024.241.10.132.136
Sensors manufactured under the BLITZSensor brand are widely used in projects of various classes. The article presents an overview of technical solutions and products of BLITZSensor, which make high-precision motion parameter measurement systems available even when implementing low-budget tasks.
Tags: accelerometers angle-sensing transducers blitzsensor digital inclinometers gyroscopes inertial navigation systems inertial sensors акселерометры гироскопы датчики угла инерциальные датчики инерциальные навигационные системы цифровые инклинометры
Reliability and tests
P. Varlamov, V. Lelyaev
ACOUSTIC MICROSCOPY: DETECTING HIDDEN DEFECTS DOI: 10.22184/1992-4178.2024.241.10.164.167
ACOUSTIC MICROSCOPY: DETECTING HIDDEN DEFECTS DOI: 10.22184/1992-4178.2024.241.10.164.167
K. Epifantsev
REVIEW OF DOMESTIC INNOVATIVE METHODS OF MANUFACTURING DEVICES FOR MONITORING SHAPE AND PROFILE DEFECTS DOI: 10.22184/1992-4178.2024.241.10.168.172
The article describes the principles of operation of control and measuring devices for analyzing the contour of parts and surface treatment defects. A comparative study of roundness testers from various manufacturers is carried out and the relevance of using domestic measuring systems is substantiated.
REVIEW OF DOMESTIC INNOVATIVE METHODS OF MANUFACTURING DEVICES FOR MONITORING SHAPE AND PROFILE DEFECTS DOI: 10.22184/1992-4178.2024.241.10.168.172
The article describes the principles of operation of control and measuring devices for analyzing the contour of parts and surface treatment defects. A comparative study of roundness testers from various manufacturers is carried out and the relevance of using domestic measuring systems is substantiated.
Tags: contourograph import substitution roughness sensor roundness tester датчик шероховатости импортозамещение контурограф кругломер
Displays
A. Pavlenko
OLED TECHNOLOGY IN MEDICAL EQUIPMENT DOI: 10.22184/1992-4178.2024.241.10.148.152
The article discusses the types of OLED displays, their advantages and the types of medical equipment they are used in.
The features of OLED displays manufactured by WiseChip
are considered.
OLED TECHNOLOGY IN MEDICAL EQUIPMENT DOI: 10.22184/1992-4178.2024.241.10.148.152
The article discusses the types of OLED displays, their advantages and the types of medical equipment they are used in.
The features of OLED displays manufactured by WiseChip
are considered.
Tags: brightness contrast endoscopes oled display oled-дисплей patient monitors response time ultrasound scanners viewing angles время отклика контрастность мониторы состояния пациентов углы обзора ультразвуковые сканеры эндоскопы яркость
Training & Education
T. Krupkina, M. Kulpinov, V. Losev, M. Putrya, Yu. Chaplygin, A. Balashov
THE PROFESSIONAL STANDARD IN THE FIELD OF PHOTONICS AS A TOOL FOR PROVIDING THE INDUSTRY WITH HIGHLY QUALIFIED PERSONNEL DOI: 10.22184/1992-4178.2024.241.10.180.182
The article presents a draft of the professional standard in the field of integrated photonics, which summarizes the labor market requirements for the qualifications of specialists creating innovative technologies. The standard will be in demand for training
and developing the competencies of enterprise personnel,
as well as for developing professional educational programs.
THE PROFESSIONAL STANDARD IN THE FIELD OF PHOTONICS AS A TOOL FOR PROVIDING THE INDUSTRY WITH HIGHLY QUALIFIED PERSONNEL DOI: 10.22184/1992-4178.2024.241.10.180.182
The article presents a draft of the professional standard in the field of integrated photonics, which summarizes the labor market requirements for the qualifications of specialists creating innovative technologies. The standard will be in demand for training
and developing the competencies of enterprise personnel,
as well as for developing professional educational programs.
Tags: integrated photonics nanophotonics personnel training photonic ics professional standard интегральная фотоника нанофотоника подготовка кадров профессиональный стандарт фотонные интегральные схемы
for Engineers
Automobile Electronics
A. Chistov, Yu. Danilkina
THE STATE AND DEVELOPMENT OF LOCALIZATION IN DOMESTIC AUTOMOTIVE ELECTRONICS DOI: 10.22184/1992-4178.2024.241.10.72.73
The article describes the current situation with providing automotive electronics with the necessary domestically produced electronic components, as well as the experience and some results
of interaction between NPP Itelma and Russian electronic components manufacturers aimed to expand the use of their products in automotive electronic units.
THE STATE AND DEVELOPMENT OF LOCALIZATION IN DOMESTIC AUTOMOTIVE ELECTRONICS DOI: 10.22184/1992-4178.2024.241.10.72.73
The article describes the current situation with providing automotive electronics with the necessary domestically produced electronic components, as well as the experience and some results
of interaction between NPP Itelma and Russian electronic components manufacturers aimed to expand the use of their products in automotive electronic units.
Tags: automotive electronic units electronic components localization автомобильные электронные блоки локализация электронная компонентная база
Annual Issue